Inspection place  Inspection environment  Inspection equipment
Inspection place (include items and sport check )	Ministry of security special police equipment quality supervision inspection center
	N/A
Inspection environment (special environment demands)	Indoor: temperature 25* C  humidity 40%RH  atmospheric pressure 1005hPa
	N/A
Main inspection equipment	Domestic  general standard measure           Domestic   common hand machine           American  INSTRON 4204 pull testing machine           Domestic   drop hammer impact testing machine           Domestic   electronic weigh           Domestic   high -temperature text chamber           Domestic   low-temperature text chamber           Domestic   level upright burning tester           Domestic   oxygen instrument
Describe of inspection samples	Riot suit consist of chest, abdomen,, crotch, upper limbs, lower limbs and so on protect parts. Prothorax use thick foam 1.5mm, 1mm pc ban, 4mm foam loyer2, 2mm thick aluminum sheet overlapping, 2mm felt, back use 4mm foam loyer2 molding, 2mm aluminum sheet overlapping, foam and so on ; limb protection course use molding armor and soft absorb energy material .

Inspection items   Inspection results
Serial number	Inspection items	Technical(standard) demand		Sample number	Inspection result	judgment
1	Outline inspection	Riot suit have no gauffer,  rift, dilapidation, gap, unstitch, drop needle, thrum and so on		NO.1-NO.4	Meat demand	P
2	Quality inspection	Riot suits total qualities are not less than 8.5kg		NO.1	6.5kg	P
3	Dress flexibility inspection	It must be dress flexibility, easy to get of ,it can not obvious limited arms free motion and genuflect, jump, squat, run, pitching, swivel		NO.1	Meat demand	P
4	Protect area inspection	chest, abdomen,, crotch,	Large-size : >0.26sq.m	NO.1	Meat demand	P
		Back	Large-size : >0.14sq.m
		upper limbs	Large-size : >0.26sq.m
		lower limbs	Large-size : >0.42sq.m
5	Structure connect strength inspection	Button strength : >300N Nylon fibulae : >120N Connective band mightiness : >2200N Other parts connect strength : >250N		NO.1	Give the stipulated force value on the connecting  fitting ,all can meat demand	P
6	Prevent thorn performance inspection	Use standard text cutter for prothorax, back, abdomen, crotch, 20J kinetic energy, upright pierce into armor coat, knifepoint can not through armor coat		NO.1	Meat demand	P
P=pass   F=fail   N=un-inspection  A=allow

Inspection items   Inspection results
Serial number	Inspection items	Technical(standard) demand	Sample number	Inspection result	judgment
7	Shockproof performance inspection	Put any protect parts of the suit on the face of rigidity use 20J kinetic energy the parts will not dilapidation craze	NO.1	Meat demand	P
8	Impact energy absorb performance inspection	Lay the prothorax back parts of the suit on the standard plaster, use 100J kinetic energy the deep of plaster impress can not exceed 20mm	NO.1	Meat demand	P
9	High-temperature prevent thorn inspection	Let riot suit put into +55*C+2*C thermo tank keep it for 4h, then going on prevent text, the result must be demand the request of prevent performance	NO.2	Meat demand	P
10	High-temperature shockproof performance inspection	Let riot suit put into +55*C+2*C thermo tank keep it for 4h, then going on shockproof  text, the result must be demand the request of shockproof performance	NO.2	Meat demand	P
P=pass   F=fail  N= un-inspection  A=allow

Inspection items   Inspection results
Serial number	Inspection items	Technical(standard) demand	Sample number	Inspection result	judgment
11	low-temperature prevent thorn inspection	Let riot suit put into -20*C+2*C thermo tank keep it for 4h, then going on prevent text, the result must be demand the request of prevent performance	NO.2	Meat demand	P
12	low-temperature shockproof performance inspection	Let riot suit put into -20*C+2*C thermo tank keep it for 4h, then going on shockproof  text, the result must be demand the request of shockproof performance	NO.2	Meat demand	P
13	Protection course fire resistance property inspection	Use Bunsen burner going on resistance text of protection course, let luminous tube and sample became 45* corner, the distance of luminous tube top and sample is 10mm, control high of the Bunsen burner blue flame is 20+2mm,move the Bunsen burner when fire 10 minutes, sample burning time will not exceed 10s	NO.1	Meat demand	P
P=pass   F=fail  N= un-inspection  A=allow

Inspection items   Inspection results
Serial number	Inspection items	Technical(standard) demand	Sample number	Inspection result	judgment
14	Surface course oxygen index inspection	According to the standard stipulated ,surface course oxygen index can not less than 28%,contral the flow of oxygen is 3.19L/min, the flow of alkaline air is 8.21L/min: damping the sample 58x150mm then fixed in the specimen holder, ignite the sample ,burning time must central in 10-15s ,move the ignite ,write down the continue burning and smolder, in 2 min continue burning and smolder mar length can not exceed 40mm	NO.1	Meat demand	P
P=pass   F=fail  N= un-inspection  A=allow